Kuulokojeen paikalleen asettaminen ja irrottaminen
Paristojen testaaminen ja vaihtaminen
Kuulokojeen hallinta
Kuulokojeen puhdistaminen
Kuulokojeesta huolehtiminen
Vahasuojan vaihtaminen
Tipin vaihtaminen
Television katselu
Musiikin kuuntelu
Tietokoneen tai tabletin käyttö
Puhelimen käyttö
Matkapuhelimen käyttö
Luokkahuoneessa opiskelu
Elokuvissa, teatterissa tai kirkossa käynti
Ravintolassa syönti tai juhliin meno
Vinkkejä uusille käyttäjille
Tukea vanhemmille
Ohjeita ja tukea läheisille
Katsele koko tuotekirjallisuutta
Käy latauskeskuksessa
ConnectClip can be paired to up to 8 Bluetooth devices.
Learn how to pair an iPhone with ConnectClip
Learn how to pair an Android phone with ConnectClip
Learn how to pair your hearing aids with a BTD 800 USB dongle
The least used device is overwritten/replaced.
Only one hearing aid or a set of hearing aids can be paired with ConnectClip.
Learn how to pair your hearing aids and ConnectClip
ConnectClip is compatible with most phones with Bluetooth 2.1 or later.
Yes. We recommend using a BTD 800 USB dongle with your computer for a more stable connection. It might also work with your computer directly, but we cannot guarantee it and we don’t support problems with this setup.
Learn how to use ConnectClip with a computer
No. ConnectClip does not work with Oticon TV Adapters, Phone Adapter or Phone Adapter 2.0.
We recommend pairing your hearing aids with ConnectClip first. Then pair ConnectClip with other Bluetooth devices such as your mobile phone. See your user instruction manual for further details.
See how you pair your hearing aids with the ConnectClip
Download the user instruction manual
Check batteries in hearing aids. Pair ConnectClip and hearing aids again (as per instructions for use manual). Make sure that hearing aids are placed right next to ConnectClip (less than 20cm). It is a good idea to switch off Bluetooth in the mobile phone during this process.
See the instruction for use manual
Only one set can be paired at a time (either monaural or a binaural pair).T o pair another set of hearing aids to ConnectClip, repeat ConnectClip and hearing aid pairing process as described in user instruction manual.
Read the user instruction manual
Watch the guide on how to pair and unpair with an iPhone
Watch the guide on how to pair and unpair with an Android phone
Yes. Long press all three ConnectClip keys for about ten seconds (until the status LED light is flashing red) to delete Bluetooth pairings.
You can use ConnectClip with most mobile phones that contain Bluetooth 2.1 or higher.
ConnectClip is compatible with most phones using Bluetooth 2.1 or higher (regardless of the operating system).